Thread about nothing #2

[RossRinSD]

Technique, just a few specialty tools.  Spot welder, hydraulic press, bending jig, bolt cutter rivet squeezer...



Okay, next start to finish build, I'll do pics and a write up.  You guys know there is info all over the net for AK builds??  I do build them a little differently than most people in that I weld the front trunion.  Purist hate that, and insist that rivets are better.  Welding is just easier for me to do rather than risk damaging a barrel assembly.

[RossRinSD]

Ross- I think you should do an AK build write up for us here - Please -

please

I'll trade you work/knowledge for that damn Mosin.  You sell it yet?

[technique]

Cool, I just got a Yugo Krinkov kit and a I'm ordering a flat.

[saigon1965]

Your build is more common man build - Less of everything - Imagine some lowly 3rd world country building these in a tunnel - They will not have access to some stuff we do - The gun performs fine in war -

Technique, just a few specialty tools.  Spot welder, hydraulic press, bending jig, bolt cutter rivet squeezer...



Okay, next start to finish build, I'll do pics and a write up.  You guys know there is info all over the net for AK builds??  I do build them a little differently than most people in that I weld the front trunion.  Purist hate that, and insist that rivets are better.  Welding is just easier for me to do rather than risk damaging a barrel assembly.

[saigon1965]

Dude - Do tell, how much? ect. -

Cool, I just got a Yugo Krinkov kit and a I'm ordering a flat.

[technique]

Dude - Do tell, how much? ect. -

Cool, I just got a Yugo Krinkov kit and a I'm ordering a flat.

$575 for the kit......eek! got it from a buddy un-issued and spankin new.

$30 flats.
http://ak-builder.com/modules.php?name=Content&pa=showpage&pid=126

[technique]

I'm building a pistol with the kit. I chucked the folding stock for safe measure.

I am going to shorten the piston, barrel and tube by myself.

[RossRinSD]

Dude - Do tell, how much? ect. -

Cool, I just got a Yugo Krinkov kit and a I'm ordering a flat.

$575 for the kit......eek! got it from a buddy un-issued and spankin new.

$30 flats.
http://ak-builder.com/modules.php?name=Content&pa=showpage&pid=126

You could have sold the stock, sure its not in the trash outside still?  I certainly do wish I'd have gotten into the building when kits were only $50...

[saigon1965]

That's awesome - Then show it to the cat selling one for what 2K -

Dude - Do tell, how much? ect. -

Cool, I just got a Yugo Krinkov kit and a I'm ordering a flat.

$575 for the kit......eek! got it from a buddy un-issued and spankin new.

$30 flats.
http://ak-builder.com/modules.php?name=Content&pa=showpage&pid=126

[technique]

kit is like this one.

[technique]

Dude - Do tell, how much? ect. -

Cool, I just got a Yugo Krinkov kit and a I'm ordering a flat.

$575 for the kit......eek! got it from a buddy un-issued and spankin new.

$30 flats.
http://ak-builder.com/modules.php?name=Content&pa=showpage&pid=126

You could have sold the stock, sure its not in the trash outside still?  I certainly do wish I'd have gotten into the building when kits were only $50...

yeah but since I plan on it being a pistol, I didn't want the stock around. It wont fit on the flat even when I bend it but since I sold my other AK's i figured its best to not have it around.

[Frijolito1988]

Ross- I think you should do an AK build write up for us here - Please -

please

I'll trade you work/knowledge for that damn Mosin.  You sell it yet?

What do you mean work

[saigon1965]

Thinking he means - Trade you his knowledge to help you with a build for the Mosin -

Ross- I think you should do an AK build write up for us here - Please -

please

I'll trade you work/knowledge for that damn Mosin.  You sell it yet?

What do you mean work

[Frijolito1988]

Thinking he means - Trade you his knowledge to help you with a build for the Mosin -

Ross- I think you should do an AK build write up for us here - Please -

please

I'll trade you work/knowledge for that damn Mosin.  You sell it yet?

What do you mean work

well i just finished washing, il probably call paul so we can go to a few gunshops in the area , wanna tag along if this materializes ?

[saigon1965]

I am going to hang here a bit longer then head to the market then off for my trip - It's going to be about 64 miles - Not too bad - a bit further away than Pasadena where I met up with everyone for the Heller dinner -

Thinking he means - Trade you his knowledge to help you with a build for the Mosin -

Ross- I think you should do an AK build write up for us here - Please -

please

I'll trade you work/knowledge for that damn Mosin.  You sell it yet?

What do you mean work

well i just finished washing, il probably call paul so we can go to a few gunshops in the area , wanna tag along if this materializes ?

[Frijolito1988]

I am going to hang here a bit longer then head to the market then off for my trip - It's going to be about 64 miles - Not too bad - a bit further away than Pasadena where I met up with everyone for the Heller dinner -

Thinking he means - Trade you his knowledge to help you with a build for the Mosin -

Ross- I think you should do an AK build write up for us here - Please -

please

I'll trade you work/knowledge for that damn Mosin.  You sell it yet?

What do you mean work

well i just finished washing, il probably call paul so we can go to a few gunshops in the area , wanna tag along if this materializes ?

you drove all the way from hayward for a dinner ?

[saigon1965]

Not quite - Heller passed on the day I was heading down here - The guys (Blackwater OPs) texted me where they were goint to meet and celebrate so I made a side trip on the way - worked out great - That's where I'd met Oji -

I am going to hang here a bit longer then head to the market then off for my trip - It's going to be about 64 miles - Not too bad - a bit further away than Pasadena where I met up with everyone for the Heller dinner -

Thinking he means - Trade you his knowledge to help you with a build for the Mosin -

Ross- I think you should do an AK build write up for us here - Please -

please

I'll trade you work/knowledge for that damn Mosin.  You sell it yet?

What do you mean work

well i just finished washing, il probably call paul so we can go to a few gunshops in the area , wanna tag along if this materializes ?

you drove all the way from hayward for a dinner ?

[Frijolito1988]

Not quite - Heller passed on the day I was heading down here - The guys (Blackwater OPs) texted me where they were goint to meet and celebrate so I made a side trip on the way - worked out great - That's where I'd met Oji -

I am going to hang here a bit longer then head to the market then off for my trip - It's going to be about 64 miles - Not too bad - a bit further away than Pasadena where I met up with everyone for the Heller dinner -

Thinking he means - Trade you his knowledge to help you with a build for the Mosin -

Ross- I think you should do an AK build write up for us here - Please -

please

I'll trade you work/knowledge for that damn Mosin.  You sell it yet?

What do you mean work

well i just finished washing, il probably call paul so we can go to a few gunshops in the area , wanna tag along if this materializes ?

you drove all the way from hayward for a dinner ?

nice nice, idk what to take, probably carne asada or cookies lol

[saigon1965]

Bring anything - Whatever it is I am sure we will all enjoy it - I'll see you guys in a bit -

[technique]

any of these good for bending flats?
http://search.harborfreight.com/cpisearch/web/search.do?keyword=hydraulic+press&Submit=Go

[Angie]

Have fun at the bbq! Wish I could've gone 

[technique]

http://www.calguns.net/calgunforum/showthread.php?p=1655773&posted=1#post1655773

[RossRinSD]

any of these good for bending flats?
http://search.harborfreight.com/cpisearch/web/search.do?keyword=hydraulic+press&Submit=Go

I use the 12 ton for 129.99 and got it on sale for a little bit less I think.  Great for flats, and barrel pressing.  I couldn't get it to work for barrel pin removal.  Motorhead recommends using an air chisel to *shock* the pin loose.  There is a way around all of that mess though.

[technique]

nevermind....his original post was edited by a mod.....see my sig.

[Gunaria]

I back from whoring around in the forest. Ran into a lot of deer hunters and even met a nice hubby & wife couple bear hunting.

[Gunaria]

I just called MC and told him to say hi to everybody at the BBQ.

[THE0NE]

yo

[THE0NE]

shake that bear???

I back from whoring around in the forest. Ran into a lot of deer hunters and even met a nice hubby & wife couple bear hunting.

[technique]

http://www.youtube.com/watch?v=_vlU2_x150k

[jacques]

technique, that Benelli is a truly evil machine. Went to shooters paradise with it today. That was fun.