Thread about nothing #2

[saigon1965]

Most of it is junk anyways -

K for everyon on the page..

I don't think it would go to my head.  But I don't think I'd enjoy screwing around here anymore.

How many pages do you have to read through?


Oji, good morning.  Do you get snow where u live?

I can not read all that.

[Frijolito1988]

OK - Now I must go and find a lock then - You have a line on any? What was it that you'd recommended earlier? Mag too?

Saigon -

 got off the phone w freakshow here is the break down

$20 for transfer fees including radlock installation ( you must supply lock )

$5-10 to pin stock open ( im surprised its this cheap cheap )

15-20$ for shipping

I have a rad lock i used , then un installed, i might sell taht to you, i wanan buy one from that other calguner, and i MIGHT have 2 mags, not sure

[saigon1965]

Little Bean - Check and let me know - But I'd like the lock that's easier access.

[jacques]

Well, back to work. There was actually a legitimate post in the for sale thread.

Ask Tech if he shipped the Benelli yet?

[RossRinSD]

Most of it is junk anyways -

K for everyon on the page..

I don't think it would go to my head.  But I don't think I'd enjoy screwing around here anymore.

How many pages do you have to read through?


Oji, good morning.  Do you get snow where u live?

I can not read all that.

I know this is the TaN, and most of the posts are insubstantial, but I wouldn't call my posts junk...

[Frijolito1988]

Little Bean - Check and let me know - But I'd like the lock that's easier access.

well  I def dont like the jjpearl lock, rad lock is th easiet that ive tried, but i dont like the looks and its riveted on there, ima try and get the one from the calguner where you bolt it on there, which means if you go out of state you can just unbolt it and ready to roll its not riveted on there semi permanent ,

[RossRinSD]

Little Bean - Check and let me know - But I'd like the lock that's easier access.

I haven't actually used any other AK locks, the Raddlock is pretty easy to use, you need the key.  I watched some other guys fumble with bulletbutton type ones.

[saigon1965]

You know what I mean - If you have to sit and sifted thru 1000s of posts = most of it is junk.

Most of it is junk anyways -

K for everyon on the page..

I don't think it would go to my head.  But I don't think I'd enjoy screwing around here anymore.

How many pages do you have to read through?


Oji, good morning.  Do you get snow where u live?

I can not read all that.

I know this is the TaN, and most of the posts are insubstantial, but I wouldn't call my posts junk...

[saigon1965]

Explain more please -

Little Bean - Check and let me know - But I'd like the lock that's easier access.

I haven't actually used any other AK locks, the Raddlock is pretty easy to use, you need the key.  I watched some other guys fumble with bulletbutton type ones.

[saigon1965]

I'll check and let you know -

Well, back to work. There was actually a legitimate post in the for sale thread.

Ask Tech if he shipped the Benelli yet?

[RossRinSD]

You know what I mean - If you have to sit and sifted thru 1000s of posts = most of it is junk.

Most of it is junk anyways -

K for everyon on the page..

I don't think it would go to my head.  But I don't think I'd enjoy screwing around here anymore.

How many pages do you have to read through?


Oji, good morning.  Do you get snow where u live?

I can not read all that.

I know this is the TaN, and most of the posts are insubstantial, but I wouldn't call my posts junk...

I usually read a page or so, then just scan the rest looking for my name.

[saigon1965]

Exactly -

You know what I mean - If you have to sit and sifted thru 1000s of posts = most of it is junk.

Most of it is junk anyways -

K for everyon on the page..

I don't think it would go to my head.  But I don't think I'd enjoy screwing around here anymore.

How many pages do you have to read through?


Oji, good morning.  Do you get snow where u live?

I can not read all that.

I know this is the TaN, and most of the posts are insubstantial, but I wouldn't call my posts junk...

I usually read a page or so, then just scan the rest looking for my name.

[RossRinSD]

Explain more please -

Little Bean - Check and let me know - But I'd like the lock that's easier access.

I haven't actually used any other AK locks, the Raddlock is pretty easy to use, you need the key.  I watched some other guys fumble with bulletbutton type ones.

The Raddlock comes with a little 'key'.  It's got a small, maybe 1/4 inchx1/8inch nub on it that goes into the maglock so you can pry it open.  I don't know of many other tools that would work to actuate the release.  Maybe a #1 phillips, or jewelers screwdriver.  It just has a pretty small hole.

The other ones you could use a bullet, screwdriver, car key, stick to open.

[Ojisan]

To be a Mod and have to read theough everything posted in all forums (I know they break up the work load into topics and groups) is a ton of work and requires a lot of dedication.

[saigon1965]

So I am leaning towards others then -

[Frijolito1988]

Explain more please -

yeah for my bullet button AK i use a screwdrivers, easiest, but still sucks, i perfer radlock than those 2

Little Bean - Check and let me know - But I'd like the lock that's easier access.

I haven't actually used any other AK locks, the Raddlock is pretty easy to use, you need the key.  I watched some other guys fumble with bulletbutton type ones.

The Raddlock comes with a little 'key'.  It's got a small, maybe 1/4 inchx1/8inch nub on it that goes into the maglock so you can pry it open.  I don't of many other tools that would work to actuate the release.  Maybe a #1 phillips, or jewelers screwdriver.  It just has a pretty small hole.

The other ones you could use a bullet, screwdriver, car key, stick to open.

[RossRinSD]

So I am leaning towards others then -

I prefer the raddlock.  It opens the easiest.  The other ones you really got to dig in there to get it actuated.

You do have to drill out the rivet that holds the mag catch in place, it uses a totally different mag catch.  So, it is more permanent in that you have to save the parts if you want to switch it back.

[saigon1965]

Ah - How is it installed?

So I am leaning towards others then -

I prefer the raddlock.  It opens the easiest.  The other ones you really got to dig in there to get it actuated.

You do have to drill out the rivet that holds the mag catch in place, it uses a totally different mag catch.  So, it is more permanent in that you have to save the parts if you want to switch it back.

[RossRinSD]

Ah - How is it installed?

So I am leaning towards others then -

I prefer the raddlock.  It opens the easiest.  The other ones you really got to dig in there to get it actuated.

You do have to drill out the rivet that holds the mag catch in place, it uses a totally different mag catch.  So, it is more permanent in that you have to save the parts if you want to switch it back.

Comes with a new pin that uses E clips.  Its basically a different shaped mag catch.  Also comes with new spring, too.

[saigon1965]

Thanks Ross -

BTW - No work today or just going in later?

[RossRinSD]

So, to put the old catch back in, pop off an e clip, slide the old catch and spring on, reinsert the axle pin, and resecure the e-clip.

[RossRinSD]

Thanks Ross -

BTW - No work today or just going in later?

I've got a few jobs to do.  Just made lunch and finishing breakfast.  I'll be out in a few mins..

[Ojisan]

Ross: cool vid on the AK flat bending!

Saigon: how to PM you from here?

[RossRinSD]

oji, click on his name, scroll to the bottom.  3rd line of text from the bottom is send personal message...

Have fun ladies, I'm out

[saigon1965]

See ya Ross -

[sorensen440]

good morning

[sorensen440]

It's nice to see my negative Karma grew while I was gone.....

[sorensen440]

So whats going on today guys?

[Ojisan]

Time on my hands.


http://www.youtube.com/watch?v=6nuiIqMQ4sA

[saigon1965]

What's up Sorensen - Don't mind the Karma thing - Kids are around.