Thread about nothing #2

[Gunaria]

What no chinito buffet?

[Frijolito1988]

randall do you know the exact place where to rivet g3, AR, AK mags to 10 rounds ? how much per rivet ? lol a dollar ? lol

[Frijolito1988]

What no chinito buffet?

no lol i just had that a few days ago

[Frijolito1988]

guys..i was thinking


what if i buy a wasr22 and make it into a ak74u clone, does the barrel on a .22 still have to be 16'' ?

[Moonclip]

[
yes i wanna go to a&w soon but not day momas bday and were going to diner

Didn't mean today but sometime soon eventually.  Where you taking mama for bday? 

idk its a family thing , i think where meeting up at claim jumper

It is semi expensive but the portions are BIG and they give out free manzanas.  Paisas love apple soda for some reason. 

The Chino buffet on Rosecrans by Lil Beans pad is ok but I like ones thta have Mongolian BBQ also better.

I know a Chino buffet with all you can eat pho. 

[Moonclip]

guys..i was thinking


what if i buy a wasr22 and make it into a ak74u clone, does the barrel on a .22 still have to be 16'' ?

Rifle barrels have to be 16" or over regardless of caliber. 

[Gunaria]

guys..i was thinking


what if i buy a wasr22 and make it into a ak74u clone, does the barrel on a .22 still have to be 16'' ?

Yes, that's a fed law.

[AR15barrels]

randall do you know the exact place where to rivet g3, AR, AK mags to 10 rounds ? how much per rivet ? lol a dollar ? lol

You just load 10 rounds into the body and measure where the follower sits.
Drill a hole at the bottom edge of the follower and put the rivet there.
Two dollars a mag to drill/rivet.
You gotta bring the ammo.

[AR15barrels]

Rifle barrels have to be 16" or over regardless of caliber. 

And smoothbores over 18".

[Moonclip]

Claim Jumper used to have a deal where they charged for kids meals by the weight of the child, now discontinued it seems.  Their BBQ sauce is ok, I'd bring some if I was not banned from BBQ's

The waitress at Claim Jumper spilled a bowl of oatmeal on my sister before. 

The free root beer candies(are you reading this lil bean!) are good too. 

[Frijolito1988]

randall do you know the exact place where to rivet g3, AR, AK mags to 10 rounds ? how much per rivet ? lol a dollar ? lol

You just load 10 rounds into the body and measure where the follower sits.
Drill a hole at the bottom edge of the follower and put the rivet there.
Two dollars a mag to drill/rivet.
You gotta bring the ammo.

im down for 2bucks per drill and rivet AND if you just tac weld the floor plate, nothng special just a 2 zap's / tacs

[Moonclip]

Rifle barrels have to be 16" or over regardless of caliber. 

And smoothbores over 18".

Even a smoothbore .22lr rifle?  Probably. 

[Frijolito1988]

yes that is what i love about claim jumpr the portions are HUGE almost everybody walks out with bags! lol and the damn "muffins" or corn bread are freaking huge

[Gunaria]

Claim Jumper used to have a deal where they charged for kids meals by the weight of the child, now discontinued it seems.  Their BBQ sauce is ok, I'd bring some if I was not banned from BBQ's

The waitress at Claim Jumper spilled a bowl of oatmeal on my sister before. 

The free root beer candies(are you reading this lil bean!) are good too. 

What no pictures? I bet you are still laughing about that till this day.

[Moonclip]

Claim Jumper used to have a deal where they charged for kids meals by the weight of the child, now discontinued it seems.  Their BBQ sauce is ok, I'd bring some if I was not banned from BBQ's

The waitress at Claim Jumper spilled a bowl of oatmeal on my sister before. 

The free root beer candies(are you reading this lil bean!) are good too. 

What no pictures? I bet you are still laughing about that till this day.

I was not there, happened many years ago too. 

[AR15barrels]

im down for 2bucks per drill and rivet AND if you just tac weld the floor plate, nothng special just a 2 zap's / tacs

Shop/machine time is $1 a minute, 20 minute minimum.
Do all the prep work yourself including marking where the holes get drilled and cleaning up the steel where you want the welds.
Then come over.
That will minimize your expense.

[Moonclip]

im down for 2bucks per drill and rivet AND if you just tac weld the floor plate, nothng special just a 2 zap's / tacs

Shop/machine time is $1 a minute, 20 minute minimum.
Do all the prep work yourself including marking where the holes get drilled and cleaning up the steel where you want the welds.
Then come over.
That will minimize your expense.

No youth or TAN discount?  What if he brings you candy or liquor or a special friend to paly with?

Seriously, have you ever taken anything besides money for work? 

[Gunaria]

I am sure he would but I think you will have to bake him a cake.

[Moonclip]

I am sure he would but I think you will have to bake him a cake.

or give him a foot massage, or help him set traps at next BBQ, bartering is fun!

[Frijolito1988]

im down for 2bucks per drill and rivet AND if you just tac weld the floor plate, nothng special just a 2 zap's / tacs

Shop/machine time is $1 a minute, 20 minute minimum.
Do all the prep work yourself including marking where the holes get drilled and cleaning up the steel where you want the welds.
Then come over.
That will minimize your expense.

Ok I will mark all the holes, but not sure wht you mean by clean the metal ? sand it ?

[Moonclip]

Ok I will mark all the holes, but not sure wht you mean by clean the metal ? sand it ?

Maybe he means degrease, make sure free of oil? 

[Frijolito1988]

Ok I will mark all the holes, but not sure wht you mean by clean the metal ? sand it ?

Maybe he means degrease, make sure free of oil? 

probably, il take some in the next weeks

[Frijolito1988]

SONG OF THE AFTERNOON

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/hs8y3kneqrs&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/hs8y3kneqrs&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>

[AR15barrels]

Even a smoothbore .22lr rifle?  Probably. 

It's not a rifle if it does not have rifling.
You are probably speaking of the savage/marlin garden gun, which is technically a 22 caliber shotgun.

[AR15barrels]

Seriously, have you ever taken anything besides money for work?

I barter for gun parts if the deal is appealing to me.

[Moonclip]

Even a smoothbore .22lr rifle?  Probably. 

It's not a rifle if it does not have rifling.
You are probably speaking of the savage/marlin garden gun, which is technically a 22 caliber shotgun.

Other makers of these guns as well, one is for sale on .net currently.  I want to shoot a solid .22lr bullet out of one to see how terrible the accuracy would be. 

[AR15barrels]

Other makers of these guns as well, one is for sale on .net currently.  I want to shoot a solid .22lr bullet out of one to see how terrible the accuracy would be.

It's just a 22 caliber musket.

[AR15barrels]

Maybe he means degrease, make sure free of oil?

dirt, oil, grease, bluing etc...
Get it down to clean raw metal, ready to weld.

[Frijolito1988]

Mini guns and tracer ammunition seems soo fun

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/tqyXQBcjhzw&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/tqyXQBcjhzw&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>

[AR15barrels]

Mini guns and tracer ammunition seems soo fun

That looks like some Dillon footage.
Dillon has some land out in the middle of the desert where he does strafing run demonstrations from his Huey or one of his little birds.