Thread about nothing #2

[jacques]

(last day of sale) and the fixed stock (more desirable) are $115. I

Why is the fixed stock more desireable?

I do not know why, but everyone has the side folders left in stock, and everybody bought out the fixed stock. The stock is so short anyway. Maybe because it adds more bakelite or something. Personally I like the fixed over folder anyway. Less pain on the shoulder.

[Frijolito1988]

Buy a cavarms receiver..

how much? those look wierd

[RossRinSD]

Buy a cavarms receiver..

how much? those look wierd

they make em in pink

[ColdSteel14]

105

[RossRinSD]

anybody got extra prozac?  Where's DS when ya need him

[Frijolito1988]

105

oh shoot , who stocks them ??

[Frijolito1988]

Buy a cavarms receiver..

how much? those look wierd

they make em in pink

perfect for you lol

[Moonclip]

anybody got extra prozac?  Where's DS when ya need him

I don't believe in most psycology stuff and especially don't believe in those meds. 

[jacques]

Whats up paul, jaques , ross and who ever else is on that is not on this page lol whats up

Where have you been?  Make sure to read all new posts here!

out and about, whats new? i dont wanna red 10 pages 1lol but i gues i will lol

Remember we were thinking this thread was about to die over here a few days back?

What up frijolito, I will not read all those pages. It is too much work, and as of late I am beginning to think I have some ADD because it is hard to concentrate on anything for a long period of time.

Whats up jaques! yes i though it was dead but you guys proved me wrong! lol I am actually reading the pages i just need like 4 or 5 more pages almost there! i should be sleeping soon , hopefully i lget the day off manana, somebody is selling a vz58 kit with a side folder for 175, good deal? you think it will be worth it to buy /

No, no, that is a rip off. If you want a VZ58 kit, call ORF tomorrow(last day of sale) and the fixed stock (more desirable) are $115. I have not seen a VZ58 kit go for that much and they shouldn't because they are not that scarce yet.

how much are recivers? how hard to build?

Right now (until end of October) the receivers are $229. That is $120 less than the website sells them for and $20 less than the first batch we got on the original group buy. They are milled also, so it is cheap

From ORF on theAKforum

VZ58
US Mfg hic-cap receiver cut to military spec $279.95 (229.95)
US Mfg Czech style muzzle break $39.95 (29.95)
VZ barrel fixture $29.95
VZ barrel arbor $29.95
US Mfg FCG $115.95
US Mfg SS Gas Piston $19.95
US Mfg (set of 2 axis pins with clips, work in ORF, Slovak, and TGI guns) $9.95 a set
VZ58 Straight Stock Parts kit, exc condition, 1 30rd magazine $119.95ea


You do not need barrel fix, arbor.

[jacques]

Frijolito, they were a bitch to make, but if you have the right tools it is not to bad. You have to press reciver onto barrel, using a barrel clamp and headspace gauge, a lot of filing and fiting to get the bolt carrier on, tig weld the brake on, parkerizing, painting.

Crap, between the tools Ross has and I have we could all have a VZ build party. It would not take more that a weekend to pump out one for each of us (minus the paint).

[ColdSteel14]

http://www.liveleak.com/view?i=563_1225135283

[ColdSteel14]

http://www.youtube.com/watch?v=JNaMH7U1VwQ

[RossRinSD]

Frijolito, they were a bitch to make, but if you have the right tools it is not to bad. You have to press reciver onto barrel, using a barrel clamp and headspace gauge, a lot of filing and fiting to get the bolt carrier on, tig weld the brake on, parkerizing, painting.

Crap, between the tools Ross has and I have we could all have a VZ build party. It would not take more that a weekend to pump out one for each of us (minus the paint).

what caliber is a VZ58?

[jacques]

Buy a cavarms receiver..

how much? those look wierd

They do look werd. I don't like them. your kinda stuck with the stock you get

[Frijolito1988]

il be interestd in  a build party, i can pitch in some$$ to the host

[jacques]

Frijolito, they were a bitch to make, but if you have the right tools it is not to bad. You have to press reciver onto barrel, using a barrel clamp and headspace gauge, a lot of filing and fiting to get the bolt carrier on, tig weld the brake on, parkerizing, painting.

Crap, between the tools Ross has and I have we could all have a VZ build party. It would not take more that a weekend to pump out one for each of us (minus the paint).

what caliber is a VZ58?

7.62x39

[ColdSteel14]

Buy a cavarms receiver..

how much? those look wierd

They do look werd. I don't like them. your kinda stuck with the stock you get

Thats the point..  Super light weight.

[Moonclip]

il be interestd in  a build party, i can pitch in some$$ to the host

It's a trap...

And call me manana if you are off. 

[jacques]

Frijolito, they were a bitch to make, but if you have the right tools it is not to bad. You have to press reciver onto barrel, using a barrel clamp and headspace gauge, a lot of filing and fiting to get the bolt carrier on, tig weld the brake on, parkerizing, painting.

Crap, between the tools Ross has and I have we could all have a VZ build party. It would not take more that a weekend to pump out one for each of us (minus the paint).

what caliber is a VZ58?

I have never built an AK, but they say these are much easier. There are only 2 rivets to hold the trigger guard on, and I used screws for those so it is removable. Everything else is pins and E-clips.

[Frijolito1988]

il be interestd in  a build party, i can pitch in some$$ to the host

It's a trap...

And call me manana if you are off. 

yes i shall

[RossRinSD]

Frijolito, they were a bitch to make, but if you have the right tools it is not to bad. You have to press reciver onto barrel, using a barrel clamp and headspace gauge, a lot of filing and fiting to get the bolt carrier on, tig weld the brake on, parkerizing, painting.

Crap, between the tools Ross has and I have we could all have a VZ build party. It would not take more that a weekend to pump out one for each of us (minus the paint).

what caliber is a VZ58?

7.62x39

Cool!  I've got headspace gauges, too.

[Moonclip]

il be interestd in  a build party, i can pitch in some$$ to the host

It's a trap...

And call me manana if you are off. 

yes i shall

I promise no traps, my word is good

About what time would you be calling though if you do? 

[Moonclip]

Special K'd up CS to 68, someone bump him to 69!

[Frijolito1988]

il be interestd in  a build party, i can pitch in some$$ to the host

It's a trap...

And call me manana if you are off. 

yes i shall

I promise no traps, my word is good

About what time would you be calling though if you do? 

maybe ten am, or noonish , my gf is coming over so im not gonna be gone the whole day just a few hours for lunch and gunshops, if i get the day off, probably will cuz work is slow, but idk yet

[Frijolito1988]

Hey coldsteel, is that your diesel @ Irwindale speedway in your avatar ?

[jacques]

Frijolito, they were a bitch to make, but if you have the right tools it is not to bad. You have to press reciver onto barrel, using a barrel clamp and headspace gauge, a lot of filing and fiting to get the bolt carrier on, tig weld the brake on, parkerizing, painting.

Crap, between the tools Ross has and I have we could all have a VZ build party. It would not take more that a weekend to pump out one for each of us (minus the paint).

what caliber is a VZ58?

7.62x39

Cool!  I've got headspace gauges, too.

Without the parking, we could probably whip out quite a few of these in a weekend. As long as there is a tig welder available, and somebody that knows how to use it.

So anyway, I got the Benelli, I want to shoot it this weekend. I have never owned a shot gun. What kind of ammo should I buy for it?

[RossRinSD]

What are you going to shoot?

Trap and skeet, I use #9 lead shot

indoor I use #00 lead

[Moonclip]

[
maybe ten am, or noonish , my gf is coming over so im not gonna be gone the whole day just a few hours for lunch and gunshops, if i get the day off, probably will cuz work is slow, but idk yet

Cool, if we can.  We can hit the pawnshop and a gunshop and have lonche possibly.  We would be a carpool also so that helps.  I'll get you back early so you can play with the gf

[jacques]

What are you going to shoot?

Trap and skeet, I use #9 lead shot

indoor I use #00 lead

It is indoor, so is #00 lead, is that the big balls or the slugs?

[ColdSteel14]

Hey coldsteel, is that your diesel @ Irwindale speedway in your avatar ?

Nah.. Mine makes a bigger cloud!